Home
| Product name | Interface | SCSI Inquiry | Recommended Linux driver |
Linux ix86 FW updater |
Latest Firmwares |
|---|---|---|---|---|---|
| 1st generation Echo drives (ADR tapes, QIC-172) | |||||
| DI30 DI30 FAST | IDE | DI-30 | ide-scsi + osst or ide-tape | di30fix(2.07) (static variant) | IDE 1.09 |
| DI30+ DI30+ FAST | IDE | DI-30 | ide-scsi + osst or ide-tape | di30-2fix(2.07) (static variant) | IDE 4.12 |
| DP30 | EPP | DP-30 | None yet | di30fix(2.07) (static variant) | IDE 1.09 |
| USB30 | USB1.1 | USB30 | usb-storage + osst | di30fix(2.07) (static variant) | IDE 1.09 |
| FW30 | IEEE1394 | FW-30 | sbp2 + osst (WIP) | di30fix(2.07) (static variant) | IDE 1.09 |
| SC30/30e/50 | SCSI2 | SC-50 | osst | sc30fix(2.07) (static variant) | SCSI 1.09 |
| 1st generation ADR drives (ADR tapes, QIC-157) | |||||
| ADR30/50/50e | SCSI3(LVD) | ADR50 Drive | st | adrfix(2.02) (static variant) | LVD 2.39 |
| ADR30ide/50ide | IDE | ADR Series | ide-scsi + st or ide-tape | adridefix(2.06) (static variant) | IDE 301G |
| 2nd generation ADR2 drives (ADR+ADR2 tapes, QIC-157) | |||||
| ADR260ide | IDE | ADR Series | ide-scsi + st or ide-tape | adr2idefix(2.07) (static variant) | IDE 5.05 (IDE 505K w/ DSC supp.) |
Note: Please make sure you identify your drive correctly before downloading
and executing the firmware updater. Have a look at /proc/scsi/scsi
(after having loaded the SCSI transport/emulation driver).
The old DI-30 (Fast) and the new DI-30+ (Fast) may be recognized by the
previous firmware revision or by a sticker on the inside of the drive door.
Don't try to flash a 4.xx firmware into a 1.0x drive or vice versa!
Look at the Firmware updater page and read the
instructions and the disclaimer before you actually try to do any firmware
updates. Updating firmwares is not without risk. With OnStream gone, you'll
have a boat anchor if it fails.